Leak Detector Calibration Equipment Suppliers - UK
Also Known As: Calibration Equipment, Leak Detector
Leak & flow test equipment manufacturers Agents in UK and Ireland for Sensistor, Schreiner and Galileo TP
Instrumentation Calibration & Repair: Our in house facilities enable us to offer a comprehensive calibration and re- calibration along with a repair service for a wide range of instrumentation including Pressure, Flow and Temperature equipment. All our Master Test Equipment has UKAS accredited certification and are directly traceable back to UKAS standards as well as conforming to an ISO 9001-2000 Quality System. Technical Support: All of our engineering staff are time served and have a considerable working knowledge of instrumentation and their associated systems. Between us, we have accumulated over 65 years experience in Process Control Systems. We offer an on site service to a number of our clients which enable us to carry out both calibration and servicing at the clients premises, therefore reducing downtime.
more...
Interceptor emptying, servicing and maintenance. Drain inspection, tracing, mapping and cleaning/jetting. Tank inspection, cleaning, decommissioning. New tank and fuel pump/systems installation. Monitoring and alarm systems. Automatic oil/water descriminating pump systems. Compliance inspections and site upgrading schemes. Spill response and clean-up. Spill kits and PPE. Emergency planning and training.
more...
Instrument engineer services
Based in the North West of England we specialise in the supply, hire and refurbishment of all types of test and measurement instrumentation. Our Product range includes Instrument Equipment Hire, Electrical test equipment hire, calibration equipment, data loggers, GE Druck products, Analysers, chart recorders, flow meters, gauges, generating sets, test sets, transmitters etc. To view our wide range of products please view our online catalogue, website or give us a call. We handle inquiries from all over the World, UK, North West, Merseyside, Lancashire etc.
more...
H.T.Products Ltd is a manufacturing company specialising in Vacuum Technology and Leak Detection.
Established in 1981 we manufacture Calibrated Reference Leaks for the Calibration of all types of leak detector and to establish the integrity of leak test systems.
The manufacture of vacuum components include-stainless steel flexible hoses, flexible braided hoses, welded bellows assemblies, KF ISO and CF flanges and fittings, fabrication of manifolds and chambers, feedthroughs and glass to metal seals. Small single orders to large quantities welcome including non standard items. although we have an extensive catalogue we also provide specials.
more...
Manufacturers of pressure test equipment,
Antech offers UKAS calibration over many fields including Electrical, Temperature, Pressure, Humidity, Air Temperature, Liquid Flow and Dimensional. Calibrations for direct traceability with National Standards using Antech's UKAS Calibration Laboratory encompassing BS EN ISO/IEC 17025, and standard calibrations to individual company's requirements. Both meet the requirements of BS EN ISO 9001:2000. We aim to continually increase our UKAS calibration capabilities and add to our already impressive UKAS schedule. On-site UKAS calibration available along with Pressure Relief Valve overhaul, servicing and certification in our UKAS Accredited Valve Testing Laboratory providing some of the best uncertainties of pressure measurement within the UK. Antech is committed to embracing the latest technologies to provide all our clients with maximum functionality through the Internet. Registered users can view the status of their calibration equipment, download their calibration certificates.
more...
A designer and manufacturer of highly sensitive gas and leak detectors, for worldwide sale. Specialising in photo ionisation detectors (PID's), SF6 detectors and the measurement of hydrogen permeation through steel.
Specialists in the Hire, Sales and Calibration of Confined Space, Working at Height and Cable Avoidance and Tracing equipment throughout Scotland.
We are a manufacturing facility and offer the complete solution to your Vacuum Requirements. - allowing complete control of the manufacturing procedure, better lead times and very competitive prices. We offer::
Chambers-Vacuum vessels: We can manufacture small chambers, vacuum vessels and non standard fabrications, using our 3D CAD CAM drawing package.
Bellows Assemblies: We offer vacuum hoses in standard annealed hose, hydroformed or braided bellows assemblies in CF, ISO and KF. This covers the HV and UHV application. Also special (non standard) bellows assemblies with flexends of your choice.
Vacuum Fittings-Components: We manufacture and stock a comprehensive range of standard products covering for all standard vacuum applications.
Vacuum Gauges: Offering a wide range of vacuum gauges to suit your needs.
Vacuum Valves: We offer a complete range of manual and pneumatic vacuum valves in CF, ISO, ANSI and KF versions. Available in Stainless steel or Aluminium.
more...
We repair and calibrate test equipment from RCD testers to Cable Locaters and test equipment. We are an ISO 9001:200 accredited Calibration Laboratory with traceability to the National Physics Laboratory for electrical test & measuring instruments. We can therefore issue your instrumentation with approved certification. With the latest Transmille calibrators & software alongside our labelling and recall system, Riversdale Services LTD is your port of call for your regular equipment servicing needs. Our quality system is able to produce full certification for equipment and also record all maintenance work, making us your total management consultancy.
more...
Micron is a UKAS Accredited Calibration Laboratory (0720) east of Birmingham providing an impressive range of calibration services including electrical, dimensional and torque at our permanent laboratory in the West Midlands together with electrical and dimensional calibrations at our clients' sites where required. Calibration services, UKAS calibration, thread gauge calibration, instrument calibration, West Midlands, Birmingham.
more...
Penny and Giles Aerospace ltd. specialises in Avionics/Aerospace products, Air Data Computers/ Modules, Quick Access Maintenance recorders, Solid State FDR,CVR and Combined Solid State Recorders, including Acquisition, Mass Storage Memory Modules, Ice and Snow detection and Ground Test Equipment
All of these items have been supplied into both the commercial and the military market -place.
To support these products P&G also developed an Air data Test set ,to support installation of Air data computers.
Other product ranges include Ice and snow detection system for rotary aircraft, a selection of LVDT,RVDT ,solenoids and potentiometers.
The companies expertise also includes level A software applications and a very quick development cycle for both hardware and software applications suited to the Aerospace industry.
Penny and Giles Aerospace Ltd. is a wholly owned subsidiary of the Curtiss-Wright Corporation forming part of the "Controls Inc., as part of the "Integrated Sensing Division"along with Autronics
more...
Acoustics consultancy, environmental, architectural & industry
A-T Instruments were founded in 1999 and have gained regular customers throughout Cardiff, Wales, and many parts of the UK.
We are an established company offering a full and comprehensive Supply, Repair, Calibration and Certification Service for all types and manufacture of Pressure, Temperature, Level, Metrology and Electrical Measuring Instrumentation including pressure / Vacuum gauges, chemical and diaphragm seals, thermometers, decade boxes, process calibrators, torque wrenches, scales, 16th edition electrical test equipment, PAT testers, RCD, insulation and loop testers, multi-meters, tank contents and level indicators, transmitters, transducers, dry block temperature calibrators and dead weight testers.
We are active in many industries including food and drink; hospitals, oil, gas, paint, varnish, pharmaceutical, and chemicals.
Our customers include Blue Chip companies such B.O.C., Coca Cola, P B Gelatins, British Nuclear Fuels, British Bakeries, Sony and many more.
more...
West Technology Systems are a specialist Vacuum Engineering and Control Instrumentation company based in Bristol. West Technology Systems Limited offers the design and manufacture of custom medium or high vacuum systems, to suit a wide range of applications. Typical systems include Vacuum Furnaces and Ovens, High Vacuum Pumping Stations, Vacuum Gauge Calibration Systems, High Vacuum Deposition Systems, Vacuum Degassing Chambers, Production Helium Leak Detection Systems and Vacuum Reservoir Systems. We also have a large range of refurbished Vacuum Pumps, Vacuum Gauges, Helium Leak Detectors, and Coating Systems and supply a wide range of vacuum products and components. We also service, maintain and repair vacuum systems. We offer contract helium leak detection service, able to satisfy all customer requirements from troubleshooting right through to testing up to fully traceable quality standards
more...
Based in Shoreham-by-Sea, West Sussex, covering the UK, Europe and USA, we're an independent UKAS calibration and test laboratory. UKAS flow calibration services and calorimetric heat exchanger testing on radiators, chargecoolers and oil coolers. Flowmeter calibration services, water flowmeters, gas flow meters, air flow meters, oil flow meters, fuel flow meters, mass flow meters. Pressure calibration, temperature calibration, humidity calibration engine test cell calibration, onsite calibration, electrical calibration, medical centre calibration, cruise ship calibration, data logger calibration. Kerosene, Jet A1, Shellsol, ISO 4113, skydrol, calibration fluid, turbine flowmeter calibration, mag flowmeter calibration, vortex flowmeter calibration, coriolis calibration, positive displacement calibration, laminar flowmeter, blowby meter calibration, max machinery calibration, krohne calibration, gas mass flow, ISO 17025, gravimetric calibration, Flowcal, flowmeter services, flowmeter calibration, traceable national standards, traceability, UKAS, NAMAS, DKD, A2LA, NIST, PTB, NEL, coolant flow, wind tunnel, thermal imaging.
more...
Leading global supplier of portable and fixed gas analyzers
A calibration laboratory, UKAS accredited. Manufacturers of leak detectors including air/gas & leak detector test systems. Also manufacturers of flow meters including gas flow & pitot tube & flow detectors. In addition, calibrator (pressure/temperature/electrical), transmittor (temperature/pressure), transducers, pressure & gauges, differential manufrs
Designers and manufacturers of assembly and test equipment for special purpose applications.
Working for over 25 years in all industries including automotive and medical / pharmaceutical.
From design and development and consultancy work to large system installations.
Leak testing machines and leak detection systems, sole UK distributor for Nolek leak test instruments. Specialist knowledge of leak test fixture and seal design.
Assembly and test solutions including fully automated, semi-automatic, linear and rotary systems, bespoke pick and place mechanisms to robot integration.
Custom built engineering solutions supplied to customer specifications using inhouse facilities.
GAMP experience, fully managed projects, experienced engineering staff.
more...
Furness Controls specialise in leak detection, leak testers, flow meters, pressure transducers, flow measurement, pressure testing, pressure calibration, flowmeter, pressure transmitters, pitot tube and manometers.
